Welcome to DEZ Arms, Inc. online store.
The website can be found at www.dezarms.com. DEZ Arms custom machined Match barrels deliver pinpoint accuracy. Tactical, military, LEO's and match shooters demand this accuracy. Each 5.56 NATO barrel is concentrically cut and muzzle threaded ½ -28 R.H. twist to accept flash hiders/suppressors, stressed relieved, turned on center to prevent accuracy robbing distortion when the barrel heats up, and hardened to 26-33 Rc giving the barrel a long life. Exterior includes detailed contouring, rich dark black manganese phosphate finish (parkerized), and hand brushed oil. Our pulled-button rifling produces a superbly accurate bore diameter with uniform rate of twist. The match barrel is machined to tighter specifications producing a tighter fit for greater accuracy. PROUDLY MADE IN THE USA. Barrels are
1 x 9 twist unless otherwise noted.PROUDLY MADE IN THE USA.
DEZ Arms, Inc., an industry leader since 2004, manufactures custom match AR15 barrels. We pride ourselves as partners with our customers, our employees, our community and our environment. Our reputation for precision accuracy along with outstanding customer service has made us a recognized name in the firearms industry, capitalizing on the sustained interest throughout the USA. Our mission is simple, DEZ Arms' barrels -- the best BANG for the Buck! Where accuracy matters...one shot says it all.
For orders totalling over $500.00, you must contact us for shipping charges.
NOTE: ALL NFA RULES APPLY. You must be 18 years or older to order from this website.
AVAILABILITY We now have 1 x 7 twist 20" h-bars and A-1 Retro barrels.
New fluted 16" barrels -- Tru-Flight and Eliminator
Match barrels, barrel assemblies, or tack-driver A3 upper receivers
20" M16A-1 barrels, assemblies, uppers
Feel free to e-mail support@dezarms.com or call 630-280-9448 to check immediate availability or to ask a question. Thanks for visiting our website.
-
-
ENTER AR15 -- CLICK HERE (167)
- AR15 Series
-
20" Bull Barrel ($153)
-
-
20" Match Bull Barrel .935 dia, 4150 (CMV) barrel w/M4 cut ext., align pin, head spaced, pre-drilled gas port hole, chambered 5.56 NATO, 1:9 T, 6-groove, button rifled, 11 deg. target crown, parkerized.
-
20" Retro A-1 Barrel Assembly 1 x 7 ($270)
-
-
20" Match Retro A-1 Barrel Assembly includes 20" A-1 lightweight (pencil) barrel, M4 cut ext, Delta Assy, barrel nut, gas tube, roll pin, .625 triangle hand guard cap, A2 FSB w bayo lug, site post hdwr incl sling swivel, and A2 flash hider. ONLY PARTS MENTIONED ARE INCLUDED.
-
7.5" Match H-Bar SBR Barrel ($155)
-
-
7.5" Match H-Bar SBR 4150 (CMV) barrel 5.56 NATO, 6 in 9 T, 6 groove, w/M4 cut barrel ext., head spaced, pre-drilled gas port hole, parkerized. Read full description
-
A3 Upper w/20" H-Bar 1 x 9T (Starting at $340)
-
-
AR15 A3 Upper Assy: 20 in. Match 1 in 9 T, 6 groove, 4150 CMV H-Bar barrel assy, A3 flat top upper Rec w charging handle (optional bolt, bolt carrier or hand guard), mag. part. tested,air gauged, head spaced and parkerized. Build your own! Click to read full descr.
-
Magpul MOE Carbine Length Hand Guard ($39)
-
-
Magpul MOE Hand Guard for AR15/M16 rifles with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility.
-
7.5" Match Kitty Kat Barrel Assembly ($225)
-
-
7.5 in. Match Kitty Kat Barrel Assembly includes 7.5 in. sbr barrel, 5.56 NATO, 1 in 9 T, 6 groove, M4 cut ext, head spaced, barrel nut, delta assy, pistol gas tube, rnd hand guard cap, A2 (set screw type) front site base w/bayonet lug, site post hardware, sling swivel, rivet, A2 flash hider.
-
AR15 A3 Upper Assembly w/7.5" Match Kitty Kat
-
-
AR15 A3 Upper Assembly - DEZ 5.56 NATO, 1 in 9" Twist, 6 groove, 7.5 in. 4150 CMV H-Bar Upper Assembly includes A3 Flat Top upper Receiver with charging handle (no bolt, bolt carrier) is mag. partical tested,air gauged, head spaced and parkerized.
-
10.5" H-Bar SBR Barrel ($155)
-
-
10.5" Match H-Bar (med. wt.) SBR BARREL, an upgrade from production or mil spec barrels. 4150 grade chrome-vanadium barrel w/M4 cut ramped barrel ext., alignment pin, head spaced, pre-drilled gas port hole, parkerized. 1 in 9 T, 6 groove, 5.56 NATO
-
10.5" H-Bar Barrel Assembly ($225)
-
-
10.5" Match H-Bar sbr barrel, M4 ext, delta assy, barrel nut, carbine length gas tube w/roll pin, round hand guard cap and A2 (set screw type) front site base w/bayo lug, site post hdwr incl sling swivel w/rivet, and A2 flash hider w/crush washer. 1 in 9 T, 6 groove, 5.56 NATO
-
14.5" Military Contour SBR Barrel ($143)
-
-
14.5" Match SBR Barrel, 4150 grade chrome-vanadium SBR, ramped barrel ext. w/M4 cuts, head spaced, gas port hole, 5.56 NATO, 1:9 RH T, 6 Groove, stress relieved, turned on center. See full description.
-
14.5" Military Contour Barrel Assembly ($230)
-
-
14.5" Match sbr barrel, M4 ext, barrel nut, delta assembly, carbine length gas tube w/roll pin, round hand guard cap and A2 (set screw type) FSB w/bayo lug, site post hdwr and sling swivel. 5.56 NATO, 1 in 9 T, 6 groove.
-
AR15 A3 Upper With 14.5" Military Contour Barrel ($370)
-
-
14.5" Barreled Assembly incl 14.5 in match 5.56 NATO, 1 in 9 T, 6-groove Match Mil Cont barrel, 4150 CMV, w A3 Rec, charging handle (no bolt, bolt carrier). Handguard option. Click to read full descr.
-
16" Military Contour Barrel ($135)
-
-
16" match military contour barrel w/M4 extension, alignment pin, pre-drilled gas port hole, and head spaced and parkerized. 4150 CMV, 5.56 NATO, 1 in 9 T, 6 groove
-
16" Military Contour Barrel Assembly ($200)
-
-
Assembly includes:
4150 CMV barrel chambered 5.56 NATO, 1 in 9 T, 6 groove, M4ext.,
b-nut
delta assembly
carbine gas tube w/roll pin
rnd. hand guard cap
A2 FSB w/bayo, site hdwr, sling swivel
flash hider, crush washer.
-
AR15 A3 Upper Assembly w/16" Military Contour Barrel ($340)
-
-
AR15 A3 Upper Assembly w/Match 16" Military Contour Barrel (no bolt or bolt carrier), charging handle, handguards optional, 5.56 NATO, 1 in 9 T, 6 groove, A2 front sight base w/bayo lug, sling swivel, gas tube, delta ring kit, and A2 birdcage flash hider
-
16" Fluted H-Bar Barrel ($163)
-
-
16" match fluted H-bar (med. wt.) barrel, 4150 chrome moly vanadium steel, 5.56 NATO, 1:9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized
-
16" H-Bar Barrel ($143)
-
-
16" M4 Medium Wt. H-Bar Barrel 5.56 NATO, 1 in 9 T, 6 groove, with M4 cut extension, alignment pin, predrilled gas port hole, headspaced. 4150 CMV, parkerized. Made in the USA
-
16" H-Bar Barrel Assembly ($200)
-
-
16" Match H-Bar Barrel Assembly 5.56 NATO, 1 in 9 T, 6 groove, with M4 cut ext, align. pin, gas port hole drilled, barrel nut, gas tube, roll pin, rnd hand guard cap, A2 FSB w/bayo lug, site post hdwr, sling swivel A2 flash hider with crush washer.
-
16" Bull Barrel ($148)
-
-
16" Match Bull Barrel .935 dia, 4150 (CMV) barrel w/M4 cut ext., align pin, head spaced, pre-drilled gas port hole, chambered 5.56 NATO, 1:9 T, 6-groove, button rifled, 11 deg. target crown, parkerized.
-
16" Fluted Bull Barrel ($168)
-
-
16" Match Fluted Bull Barrel .935 dia, 4150 (CMV) barrel w/M4 cut ext., align pin, head spaced, pre-drilled gas port hole, chambered 5.56 NATO, 1:9 T, 6-groove, button rifled, 11 deg. target crown, parkerized.
-
16" Fluted H-Bar Barrel Assembly ($230)
-
-
16" Match Fluted H-Bar Barrel Assembly 5.56 NATO, 1 in 9 T, 6 groove, with M4 cut ext, align. pin, head spaced gas port hole drilled, barrel nut, delta assy, gas tube, roll pin, rnd hand guard cap, A2 FSB, site post hdwr, frnt. sling swivel, A2 flash hider with crush washer.
-
AR-15 A3 Upper Assembly w/16" Fluted H-Bar Barrel ($365)
-
-
AR-15 A3 Upper Assembly 5.56 NATO, 1 in 9 T, 6 groove, 16" 4150 CMV Fluted H-Bar Upper Assembly includes A3 flat top Receiver with charging handle (add a 5.56 bolt with carrier option) is mag. partical tested,air gauged, head spaced and parkerized.
-
16" A-1 Retro (Pencil) Barrel ($135)
-
-
16" Match Retro A-1 Barrel .625 dia at gas block. 4150 CMV, chambered 5.56 NATO, 1 in 9 t, 6 groove, M4 ext., head spaced, parkerized.
-
16" Match Retro A-1 Barrel Assembly ($205)
-
-
16" Match Retro A-1 Barrel Assembly with .625 dia A2 (set screw type) front site base, mil spec. hand guards (optional), and A2 flash hider. 5.56 NATO, 1 in 9 T, 6 groove. See full descr.
-
AR15 A3 Upper Assy. w/16" Match .625 Retro A-1 Barrel ($350)
-
-
AR15 A3 Upper Assembly w match 5.56 Nato, 16 in. 1 in 9 T, 6 groove, 4150 CMV A-1 Retro (lightweight) barrel .625 dia, Upper Assembly includes A3 Flattop Receiver with charging handle (no bolt, bolt carrier) Handguard option.
-
16" HOLE IN ONE Fluted Barrel ($173)
-
-
16" match - HOLE-IN-0NE - fluted H-bar (med. wt.) barrel, 4150 (CMV) steel, 5.56 NATO, 1:9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
A3 Upper W/16" Fluted Hole-N-1 (Start @ $380) BUILD YOUR OWN!
-
-
AR-15 A3 Upper Assembly 5.56 NATO, 1 in 9 T, 6 groove, 16 in. 4150 CMV Match Fluted H-Bar Upper Assembly includes A3 flat top Receiver with charging handle (optional bolt, bolt carrier or hand guard) is mag. partical tested,air gauged, head spaced and parkerized.
-
16" (HOLE IN ONE) Barrel Assembly ($240)
-
-
16" Match Fluted Hole-In-One Barrel Assembly. 16" barrel 5.56 NATO, 1 in 9 T, 6 groove, w M4 ext, head spaced, barrel nut, delta assy. carb length gas tube w roll pin, rnd hand guard cap A2 (set screw type) FSB w site post hdwr, frt sling swivel, comp w crush washer.
-
16" ELIMINATOR Fluted H-Bar Barrel ($173)
-
-
16" Match - Eliminator - Fluted H-bar (med. wt.) barrel, 4150 grade chrome-vanadium steel, 5.56 NATO 1:9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
16" ELIMINATOR H-Bar Barrel Assembly ($240)
-
-
16" Match Fluted H-Bar (Eliminator) Barrel Assembly with 5.56 NATO Chamber, 1 in 9 T, 6 groove, M4 ext, align. pin, head spaced, gas port hole drilled, barrel nut, delta assy, gas tube, roll pin, rnd hand guard cap, A2 FSB, site post hdwr, frnt. sling swivel, comp with crush washer.
-
A3 Upper W/16" Fluted Eliminator (Start @ $380) BUILD YOUR OWN!
-
-
AR15 A3 Upper Assy: 16 in. Match 5.56 NATO, 1 in 9 T, 6 groove, 4150 CMV Fluted H-Bar barrel assy, A3 flat top Receiver with charging handle (optional bolt, bolt carrier or hand guard) mag. partical tested,air gauged, head spaced and parkerized. Build your own! Click to read full descr.
-
AR15 A3 Upper Assy. w/16" Fluted Target Crown Bull Barrel ($365)
-
-
AR15 A3 Upper Assy: 16 in. Match 5.56 NATO, 1 in 9 T, 6 groove, 4150 CMV Fluted bull barrel assy, A3 flat top upper Receiver with charging handle (no bolt, bolt carrier or hand guard) is mag. partical tested,air gauged, head spaced and parkerized. Click to read full descr.
-
16" TRUE FLIGHT Fluted Barrel ($173)
-
-
16" Match - TRUE FLIGHT - fluted H-bar (med. wt.) barrel, 4150 (CMV), 5.56 NATO, 1 in 9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
16" TRU-FLIGHT Barrel Asembly ($240)
-
16" Match Fluted H-Bar Barrel Assembly 6.56 NATO, 1 in 9 T, 6 groove, with M4 cut ext, align. pin, gas port hole drilled, barrel nut, delta assy, gas tube, roll pin, rnd hand guard cap, A2 FSB, site post hdwr, frnt. sling swivel, comp with crush washer.
-
16" TWISTER Fluted H-Bar Barrel ($173)
-
-
16" Match - TWISTER - fluted H-bar (med. wt.) barrel, 4150 CMV steel, 5.56 NATO, 1:9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
16" TWISTER Barrel Assembly ($240)
-
-
Assembly includes:
4150 16" chambered 5.56 NATO, 1 in 9 T, g 6roove, incl. M4 cut ext
barrel nut
delta assy
gas tube w/roll pin
top picatinny gas block
rnd hand guard cap
3 port comp w/crush washer
-
AR15 A3 Upper Assembly W/16" Barrel Choice (Starting at $360)
-
-
AR15 A3 Upper Assembly w 16" Match 5.56 NATO barrel choice, 1 in 9" Twist 6 groove. DEZ Tack-Driver Series 5.56 A3 Upper Group, with optional bolt/carrier.
Match upper designed for police, SWAT, military use as well as medium to heavy game hunters
-
16" Ultra Match Grade 6.8 x 43mm SPC II Barrel ($200)
-
-
16" Ultra Match Grade 6.8 x 43mm SPC II Barrel * 16” 4150 chromoly vanadium (CMV) * 6.8x43 mm SPC SPEC II chamber * 1:10.5 twist * 6 groove * pulled-button rifled * special 11º target crown * 5/8x24 threaded muzzle * parkerized * SEE FULL DESCR.!
-
16" Ultra Match 6.8 x 43mm SPCII Barrel Assembly ($270)
-
-
16" Ultra Match 6.8 x 43mm SPCII Barrel Assembly with M4 cut ext, align. pin, gas port hole drilled, barrel nut, delta assy, gas tube, roll pin, rnd hand guard cap, A2 FSB, site post hdwr, frnt. sling swivel, A2 flash hider with crush washer.
-
AR15 A3 Upper Assy W/16" Ultra Match 6.8 SPCII Barrel ($475)
-
-
AR15 A3 Upper Assy w 16 in Ultra Match 6.8 SPCII Barrel chambered 6.8x43mm includes A3 Flat Top Receiver with charging handle and optional bolt, carrier and handguard. Read full descr.
-
20" Match Fluted H-Bar Barrel Assembly ($240)
-
-
20" Match Fluted H-Bar barrel, M4 ext, head spaced, Delta Assy, barrel nut, riifle length gas tube w/roll pin, triangle hand guard cap and A2 (set screw type) FSB w/site post hardware, and A2 flash hider w/crush washer. 5.56 NATO, 1 in 9 T, 6 groove.
-
20" A1 Retro Barreled Upper (Starting at $430)
-
-
20" Match A1 Retro Barreled A3 Upper Assembly comes with
20” Match A1 Retro Barrel 1 x 7 T
A-2 Flash Hider
A-2 FSB
M16A1 Rifle Hand Guard
A3 Upper
Bolt & Carrier
Charging Handle
Read full descr.
-
A3 Upper w/20" H-Bar 1 x 7T (Starting at $370)
-
-
AR15 A3 Upper Assy: 20 in. Match 1 in 7 T, 6 groove, 4150 CMV H-Bar barrel assy, A3 flat top upper Rec w charging handle (optional bolt, bolt carrier or hand guard), mag. part. tested,air gauged, head spaced and parkerized. Build your own! Click to read full descr.
-
20" Match - HOLE IN ONE - Fluted H-Bar Barrel ($178)
-
-
20" Match - HOLE-IN-0NE - fluted H-bar (med. wt.) barrel, 4150 (CMV) steel, 5.56 NATO, 1:9 twist, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
20" Match A-1 Retro (Pencil) Barrel 1 x 7 Twist ($160)
-
-
20" Match Retro A-1 Barrel .625 dia at gas block. 4150 CMV, chambered 5.56 NATO, 1 in 7 T, 6 groove, M4 ext., head spaced, parkerized.
-
A3 Upper Assembly w/20" Match Twister Barrel & M5 RAS ($700)
-
-
A3 Upper Assembly w/20" Match Twister Barrel & M5 RAS includes forehand pistol (handle) grip and accessory kit. Click to see full description.
-
A3 Upper w/20" Match Twister (Start @ $385) BUILD YOUR OWN!
-
-
AR15 A3 Upper Assy: 20 in. Match 1 in 9 T, 6 groove, 4150 CMV Fluted H-Bar (Twister) barrel assy, A3 flat top upper Rec w charging handle (optional bolt, bolt carrier or hand guard), mag. part. tested,air gauged, head spaced and parkerized. Build your own! Click to read full descr.
-
20" Match H Bar Barrel 1 x 7 T ($153)
-
-
20" Match H-Bar (med. wt.) Barrel 5.56 NATO, 1 in 7 T, 6 groove, includes M4 extension, alignment pin, gas hole drilled and head spaced. Sold in parkerized finish.
-
20" Match Fluted H-Bar Barrel ($168)
-
-
20" Match Fluted H-Bar Barrel, made from 4150 (CMV) , 5.56 NATO, 1 in 9 T, 6 groove and includes M4 extension, alignment pin, gas port hole drilled and head spaced; parkerized
-
20" Match H Bar Barrel Assembly 1 x 7 T ($225)
-
-
20" Match H-Bar barrel, 5.56 NATO, 1 in 7 T, 6 groove, M4 ext, barrel nut, riifle length gas tube w/roll pin, triangle hand guard cap and A2 (set screw type) front site base w/site post hardware, and A2 flash hider w/crush washer.
-
20" Match - TWISTER - Fluted H-bar (med. wt.) Barrel ($178)
-
-
20" match - TWISTER - fluted H-bar (med. wt.) barrel, 4150 (CMV),5.56 NATO, 1 in 9 T, 6 groove, w/M4 extension, alignment pin, gas port hole drilled and headspaced; parkerized.
-
AR-15 Gas Block Single Picatinny Rail .750 or .936 dia. ($45)
-
-
AR-15 Gas Block Single Picatinny Rail .936 inside dia. Fits Bull Barrel; .750 inside dia fits most AR15 barrels.
-
AR-15/M16 Low-Profile Gas Block ($35)
-
-
AR-15/M16 Low-Profile Gas Block Lightweight, Minimal Profile To Fit Under Tactical Handguards & Free-Float Tubes
-
AR15 Handguards with Liners ($20)
-
-
AR15 Handguards (carbine length) Fits most AR-15/M-16 rifles. Constructed of high density and durable polymer. Complete with aluminum heat shield to dissipate heat. Actual item has 7 Holes
-
AR15 3 Port Muzzle Break/Comp ($32)
-
-
AR15 3 Port Muzzle Break/Comp fits standard 1/2"-28 tpi threaded barrels. Sold with crush washer
-
AR15 6.8 SPC Bolt ($75)
-
-
AR15 6.8 SPC Bolt (no carrier included) Complete bolt for use with 6.8 SPC barrels.
-
AR15 Ejection Port Cover Pin ($4)
-
-
AR15 Ejection Port Cover Pin by DEZ Arms eliminates the need for C-Clip and added time putting them together. No more fighting with the c-clip! Our piece does not require a c-clip and installs easily.
-
Complete Bolt Assembly for 5.56 or 6.8 rifles ($125/$155)
-
-
Complete Bolt Assembly (semi-auto). For 5.56 or 6.8 rifles
-
Knights Armament M5 Rifle Rail Adapter System $300
-
-
Knights Armament M5 Rifle Rail Adapter System
Fits 20" length Barrels
-
AR15 Front Sling Swivel With Rivet ($5)
-
-
AR 15 Front Sling Swivel with rivet for your front sight base for AR15, M16, M4.
-
AR15 Forward Assist Assembly ($14)
-
-
Forward Assist Assembly for your AR15, M16, M4. Forward assist pawl is machined from tool steel, heat treated, and cap is press fit & pinned. Includes Forward Assist, Forward Assist Spring, Roll Pin.
-
AR 15 Ejection Port Assembly ($12)
-
-
AR 15 Ejection Port Cover Assembly for your AR15, M16, M4. Assembly includes Ejection Port Cover Door, Cover Pin, C-Clip, Ejection Port Cover Spring. Parts may be ordered separately.
-
AR15 Upper Parts Kit ($24)
-
-
A3 Upper Parts Kit This Kit comes will everything you need to assemble your stripped upper.
-
AR15 Barrel Nut ($9)
-
-
Barrel nut for your AR15, M16, M4.
-
AR 15 Charging Handle ($19)
-
-
AR 15 Charging Handle with standard release
-
AR15 Delta Ring Assembly ($12)
-
-
AR15 Delta Ring Assembly includes Delta Ring, Hand Guard Snap Ring and Weld Spring
-
AR15 Barrel Extension ($19)
-
-
For your AR15, M16, M4. For use by barrel manufacturers. Your choice of extension with M4 feedramps. In machine finish.
-
AR15 Handguard Cap ($3)
-
-
Round caps (unnotched) are typically used on M4 barrels with a standard carbine length gas system. Triangle are typically used on AR15 barrels with a mid length or rifle length gas system.
-
AR 15 Gas Tubes ($12)
-
-
AR15 Gas Tube. Includes roll pin.
-
AR 15 A2 Flash Hider ($9/$12)
-
-
Standard flash hider for M16A2, M16A3, M16A4, M4, M4A1. Optional crush washer available.
-
AR15 A2 FSB ($30/$35)
-
-
AR15 A2 FSB .750 or .625 dia; parked. Set Screw mt. or dowel pin. W/w/o bayo lug --SS mt. req. no taper pins-just align & tighten SS. No need to notch barrel. Absolutely zero front site.
-
1919 A-4 Barrels 8 mm x 57
-
-
New production USA made A4, 8 mm x 57 barrel made from 4140 chrome moly steel, 1 in 10 twist, 6 groove, stress relieved, turned on center for precision accuracy. Sold in parkerized finish.
-
1919 A-4 Slip-On Flash Hider
-
-
Slip on this futuristic flash hider to upgrade your 1919 A-4 from that antique look to a ultra modern look. Adds 8 in. to your gun length.
-
1919 A-4 One Piece Booster
-
-
New production 1919 A-4 one piece booster made from 4140 chrome moly steel with exact internal dimensions, angles, margins, surface and exit hole daimeters for reliable and proper barrel functioning. Sold in parkerized finish.
-
1919 A-4 Combo Flash Hider & Booster
-
-
The flash hider and one piece booster transforms your antique looking 1919 into an ultramodern weapon. Order as a bundle and save.
-
1919 Leveling Extension & Stabilizer -- Made in USA!
-
-
This unique elevation stabilizer w/detent adjustment knob,easily mounts to your 1919 A-4/A-6 to the German MG-AA tripod. No special tools required; just snap it on to your tripod's main support insert supplied pins, and pin to bottom of weapon.
-
1919 A-4/A-6 Handle
-
-
This extended charging handle is designed to be cut to your desired length. Offers a non-slip grip for racking in that starting round! Light weight and made from 4140 steel; sold in parked finish. Made in U.S.A.
-
AK-47 Adjustable Gas Block
-
-
DEZ Arms, Inc. Adjustable Gas Block eliminates carbon build-up & heat, reduces recoil, damage to receiver rails, bolt carrier racking; enhances bullet velocity. Adjustable off position (single shots) to full gas (any load). MADE IN USA
